01TRITAN / CONCEPTSXB-001 / 16 oz
AXIS
16 oz travel tumbler. Offset rectangles and restrained type.
Etched-detail concept · trial requiredExplore this model ↗
DECORATION CAPABILITY
Explore restrained wordmarks and fine geometric details on selected Tritan vessels. Material response, contrast and surface condition must be validated on actual samples before production.
From 10 pcs on an existing model, one position or several.
Compare six decoration & configuration options →
COMPARE YOUR OPTIONS / BEFORE THE ARTWORK
Choose the effect. Review the process.
Compare six customization directions in one view. These are planning options; material compatibility and final appearance require physical sampling of the selected model.
| Process / configuration | Desired effect | Vessel & material planning | Confirm by sample | Next step |
|---|---|---|---|---|
| 01UV PrintingSurface decoration | Color-rich logos, illustrations and selected white-ink effects. | Review the selected plastic cup. Silicone requires separate validation. | Print area, curvature, white underbase, adhesion and care. | Explore details ↗Enquire about this option → |
| 02Heat TransferSurface decoration | Multi-color graphics and larger compositions around the vessel. | Review plastic cups or LED cup shells for heat and fixture suitability. | Heat response, taper, transfer boundary, registration and adhesion. | Explore details ↗Enquire about this option → |
| 03Laser Marking / EngravingSurface markingCURRENT PAGE | Material-dependent tonal or textured marks; appearance requires trials. | Selected Tritan concepts are shown; feasibility is not yet universal. | Material response, contrast, surface condition and agreed care tests. | Explore details ↗Enquire about this option → |
| 04Screen PrintingSurface decoration | Controlled color blocks, lettering and selected multi-pass artwork. | Discuss stadium cups and silicone vessels against the actual ink system. | Color separations, screens, registration, adhesion and flex where relevant. | Explore details ↗Enquire about this option → |
| 05LED CustomizationLighting configuration | Lighting plus branding; discuss surface decoration as a separate choice. | LED cups, LED ice buckets and selected bar accessories. | Light modes, activation, power access, cleaning and packaging. | Explore details ↗Enquire about this option → |
| 06Cold Color-Changing InkInteractive ink | A coated region changes color as the wall cools; fixed artwork can gain contrast. | Confirmed cold-response models. Review partial and full variants separately. | Coated zone, room/cold visibility, formula response and UV compatibility. | Explore details ↗Enquire about this option → |
LED is a lighting configuration and may be combined with suitable surface decoration. Cold-change and UV combinations also require validation. You can enquire before deciding on every process.
Not sure yet? Ask for selection help →QUICK ANSWER
Laser marking uses focused energy to change a material surface. Response depends on the actual material and laser process. These Tritan cup visuals are design concepts, not validated production samples; begin with material and color trials.
FROM ARTWORK TO SAMPLE APPROVAL
Quiet geometry. Considered detail.
Discuss this process with your artwork →PROCESS CONCEPT · MATERIAL TRIAL REQUIRED · NOT FACTORY PHOTOGRAPHY01 / 0401Vector layout02Blank reference vessel
Review the wordmark, line weight and model-specific usable area before material trials.
SPECIFICATIONS
Laser Marking specs & durability
| Design | Fine geometric linework and restrained wordmarks |
|---|---|
| Mark area | Model-specific exterior area; review curvature and fixture |
| Appearance | Contrast and depth require actual grade/color trials |
| Durability | Agree and verify tests on an approved sample |
| Materials | Selected Tritan bodies; production suitability unverified |
| MOQ | Confirm after material trial and production review |
Best for
- Business-minimal design exploration
- Small wordmarks and geometric linework
- Model-specific material trial planning
Not ideal for
- Assuming metallic, deep-cut or high-contrast results without a trial
THE BUSINESS EDIT / 06 DESIGN INTENT CONCEPTS
A restrained mark. A distinct identity.
Two travel tumblers, two wine glasses, one champagne flute and one beer mug. Explore fine geometric linework and restrained typography on the selected Tritan vessels.
01TRITAN / CONCEPT
02TRITAN / CONCEPTSJSB-001 / 48 oz
NEXUS
48 oz handled tumbler. Interlocking squares form a quiet business identity.
Etched-detail concept · trial requiredExplore this model ↗
03TRITAN / CONCEPTHJB-039 / 445 ml / 15.5 oz
FORM
15.5 oz wine glass. Open circles and spaced lettering preserve transparency.
Etched-detail concept · trial requiredExplore this model ↗
04TRITAN / CONCEPTHJB-041 / 360 ml / 12 oz
VERTEX
12 oz wine glass. An open triangle and a vertical line create a restrained focal point.
Etched-detail concept · trial requiredExplore this model ↗
05TRITAN / CONCEPTHJB-066 / 150 ml / 5 oz
ELEVATE
5 oz flute. Graduated vertical lines follow the slender bowl.
Etched-detail concept · trial requiredExplore this model ↗
06TRITAN / CONCEPTPJB-050 / 502 ml / 17 oz
STRUCTURE
17 oz beer mug. Architectural hexagonal linework with a small wordmark.
Etched-detail concept · trial requiredExplore this model ↗
Design first. Validate on the actual material.
design intent, not validated Tritan laser-marked production samples. Enlarged details illustrate the proposed recessed edges, microtexture and frosted light scattering only. Contrast, depth, durability and material suitability require production trials. Tumbler concepts concern the Tritan body, not other-material lids or straws.
Discuss my marking and sample brief →FAQ
Laser Marking questions, answered
Do not assume universal compatibility. Test the actual resin grade, color, wall structure and selected laser process before approving an application. custom silicone cups →
We will review your project and contact you. Timing for artwork proofs, samples and a formal quotation will be confirmed for your project.
BUYING GUIDE
Check Laser Decoration Compatibility
Laser decoration depends on the exact substrate, surface and coating. Discuss the chosen model first, especially when evaluating plastic or silicone drinkware rather than metal cups.
| Review area | What to confirm |
|---|---|
| Model and surface | Identify the actual cup, material and surface finish before selecting the method. |
| Artwork and sample | Review placement, colour or pattern requirements on a physical reference. |
| Approval criteria | Agree appearance limits and care instructions for the decorated product. |
Can every plastic or silicone cup be laser marked?
No universal compatibility should be assumed. Ask for a material-specific feasibility review and sample. Compare screen printing or other decoration methods when laser treatment is unsuitable for the chosen surface.
MODEL & CUSTOMIZATION PLANNING
Related products and buying guides
Continue with the relevant products, decoration options and buying requirements for your project.