OUTDOOR BRAND PROJECTS·LOGO CUSTOMIZATION·SPECIFICATIONS BY PROJECT·FACTORY DIRECT
EVERCUP

EVERCUP · LED CUSTOMIZATION

Custom LED Drinkware
& Bar Accessories

Your product. Your logo.
A light effect made for the brief.

Explore custom LED drinkware, light-up cups, LED ice buckets and branded bar accessories. Review product models, logo options, LED configuration and the production workflow for your project.

Discuss an LED project ↗Explore product models ↓

Specification, MOQ and delivery terms confirmed for the selected project.

EVERCUP LED Light Up Color Changing Glow Cups
FGB-034PRODUCT REFERENCE · ILLUSTRATION
34LED light-up cups4LED ice buckets11LED bar accessories
Compare six decoration & configuration options →

COMPARE YOUR OPTIONS / BEFORE THE ARTWORK

Choose the effect. Review the process.

Compare six customization directions in one view. These are planning options; material compatibility and final appearance require physical sampling of the selected model.

Comparison of six drinkware decoration and configuration options
Process / configurationDesired effectVessel & material planningConfirm by sampleNext step
01UV PrintingSurface decorationColor-rich logos, illustrations and selected white-ink effects.Review the selected plastic cup. Silicone requires separate validation.Print area, curvature, white underbase, adhesion and care.Explore details ↗Enquire about this option →
02Heat TransferSurface decorationMulti-color graphics and larger compositions around the vessel.Review plastic cups or LED cup shells for heat and fixture suitability.Heat response, taper, transfer boundary, registration and adhesion.Explore details ↗Enquire about this option →
03Laser Marking / EngravingSurface markingMaterial-dependent tonal or textured marks; appearance requires trials.Selected Tritan concepts are shown; feasibility is not yet universal.Material response, contrast, surface condition and agreed care tests.Explore details ↗Enquire about this option →
04Screen PrintingSurface decorationControlled color blocks, lettering and selected multi-pass artwork.Discuss stadium cups and silicone vessels against the actual ink system.Color separations, screens, registration, adhesion and flex where relevant.Explore details ↗Enquire about this option →
05LED CustomizationLighting configurationCURRENT PAGELighting plus branding; discuss surface decoration as a separate choice.LED cups, LED ice buckets and selected bar accessories.Light modes, activation, power access, cleaning and packaging.Explore details ↗Enquire about this option →
06Cold Color-Changing InkInteractive inkA coated region changes color as the wall cools; fixed artwork can gain contrast.Confirmed cold-response models. Review partial and full variants separately.Coated zone, room/cold visibility, formula response and UV compatibility.Explore details ↗Enquire about this option →

LED is a lighting configuration and may be combined with suitable surface decoration. Cold-change and UV combinations also require validation. You can enquire before deciding on every process.

Not sure yet? Ask for selection help →

CUSTOMIZATION SCOPE

Define what makes it yours.

Choose the product first. Review the configuration and sample before committing to production.

FROM BRIEF TO PACKED PRODUCT

The LED production workflow.

A planning sequence for custom LED drinkware and bar accessories. The actual routing, tooling and checks are agreed for the selected design.

01Brief02Shell03LED module04Branding05Assembly06Inspection07Packing
01Define the product
YOUR LOGOWORKFLOW ILLUSTRATION · NOT A FACTORY PHOTO

Start with a cup, ice bucket or bar accessory. Agree the intended use, dimensions, logo, quantity, destination and required arrival date. New shapes need a separate tooling review.

Approval point
Approve the product brief and sample requirements.

02Form the shell
YOUR LOGOWORKFLOW ILLUSTRATION · NOT A FACTORY PHOTO

Review the specified resin, tool and shell geometry. Prepare the cup or housing and check the light-transmitting area, module fit and part interfaces for the selected design.

Approval point
Check part appearance, dimensions and fit.

03Configure the LED module
YOUR LOGOWORKFLOW ILLUSTRATION · NOT A FACTORY PHOTO

Select a compatible light module and define colours, modes and activation. Review battery or charging arrangements and access to the power compartment. Any circuit changes require a separate technical review.

Approval point
Approve the light effect and power configuration on a sample.

04Apply the branding
LOGOYOUR LOGOWORKFLOW ILLUSTRATION · NOT A FACTORY PHOTO

Choose an appropriate logo process for the substrate and artwork. Review location, coverage and contrast with the light both on and off; keep controls and light paths clear.

Approval point
Approve the physical decoration sample.

05Assemble the product
YOUR LOGOWORKFLOW ILLUSTRATION · NOT A FACTORY PHOTO

Fit the light module, power components and housing in the agreed sequence. Check the mounting, closures and any lids or accessories against the approved sample.

Approval point
Check assembly, switches and component retention.

06Inspect against the sample
YOUR LOGOWORKFLOW ILLUSTRATION · NOT A FACTORY PHOTO

Check the specified lighting modes, activation, appearance, decoration and fit. Agree runtime, ingress or destination-specific testing separately where the project requires it.

Approval point
Use the agreed inspection and acceptance plan.

07Pack for the order
YOUR LOGOWORKFLOW ILLUSTRATION · NOT A FACTORY PHOTO

Confirm individual packaging, protective separators, cartons, care information and battery details. Review applicable transport documents for the actual battery and destination before dispatch.

Approval point
Approve packaging, instructions and shipping scope.

Illustrations explain the workflow; they do not represent factory photographs or certified test results.

PRODUCT MODELS / EVERCUP

Find the product behind the light.

Browse the existing model library. Product references help define the project; final specifications and supply conditions are confirmed in the quotation.

Showing 23 models

LED cup category ↗LED ice bucket category ↗Coaster buying guide ↗

SAMPLE & ORDER REVIEW

Approve the details.
Then make the product.

For a useful quotation, send the model, quantities, intended use, artwork, target lighting, power preferences, packaging and destination.

Request an LED quotation ↗
  • Model, shape, dimensions and accessory fit
  • Logo, colour and appearance with lights on and off
  • Lighting, activation and power configuration
  • Care, test requirements and acceptance criteria
  • Packaging, battery information and shipping scope

BUYER QUESTIONS

LED customization, explained.

What can I customize on LED drinkware?

Start with the product model, logo, body colour and packaging. Lighting colours, modes, activation and power options depend on the selected module and housing. New tooling or electronics changes are reviewed separately.

Do all LED cups have the same light effects or batteries?

No. Review the actual model and sample. Button, pressure or liquid activation, colour-changing effects, battery access and charging arrangements are model-specific.

Can I add a logo to light-up cups, ice buckets and coasters?

Share the model and vector artwork. Confirm substrate compatibility, print area and readability with the light switched on and off before approving the decoration sample.

What are the MOQ and production lead time?

They depend on the model, artwork, lighting configuration, packaging and development scope. Send estimated quantities and the required arrival date for a project quotation. Stock purchase minimums are not custom-logo minimums.

Are LED drinkware products waterproof or dishwasher safe?

Do not assume either property. Follow the care instructions for the selected model, keep electrical components away from moisture as instructed, and request relevant test information for any special requirement.

Is glow-in-the-dark or UV-reactive drinkware the same as LED drinkware?

No. LED products use an electrical light source. UV-reactive and glow-in-the-dark materials work differently; they are not included in this LED model selection unless the product also has an LED module.

What should I send for an LED product quotation?

Send model numbers or reference images, estimated quantities, intended use, logo artwork, desired lighting, power preference, packaging and destination. Identify any required tests or documents so the quotation can define their scope.

MODEL & CUSTOMIZATION PLANNING

Related products and buying guides

Continue with the relevant products, decoration options and buying requirements for your project.