COLD ACTIVATED / A LITTLE REVEAL

Pour cold. Reveal your brand.

Turn the moment of color change into a moment for your brand. See water level, cooling and color response unfold on the same vessel.

The UV wordmark stays fixed. As the temperature-responsive background develops color, the previously low-contrast white artwork becomes clearer.

Design my color-change project →

Design-principle simulation, not live photography or a temperature test. Formula, activation temperature, response time, coating area, UV compatibility and actual appearance require sample approval.

LIVE COLOR STUDYANIMATED CONCEPT

ROOM TEMPERATURE · ORIGINAL BASE

Compare six decoration & configuration options →

COMPARE YOUR OPTIONS / BEFORE THE ARTWORK

Choose the effect. Review the process.

Compare six customization directions in one view. These are planning options; material compatibility and final appearance require physical sampling of the selected model.

Comparison of six drinkware decoration and configuration options
Process / configuration	Desired effect	Vessel & material planning	Confirm by sample	Next step
01UV PrintingSurface decoration	Color-rich logos, illustrations and selected white-ink effects.	Review the selected plastic cup. Silicone requires separate validation.	Print area, curvature, white underbase, adhesion and care.	Explore details ↗Enquire about this option →
02Heat TransferSurface decoration	Multi-color graphics and larger compositions around the vessel.	Review plastic cups or LED cup shells for heat and fixture suitability.	Heat response, taper, transfer boundary, registration and adhesion.	Explore details ↗Enquire about this option →
03Laser Marking / EngravingSurface marking	Material-dependent tonal or textured marks; appearance requires trials.	Selected Tritan concepts are shown; feasibility is not yet universal.	Material response, contrast, surface condition and agreed care tests.	Explore details ↗Enquire about this option →
04Screen PrintingSurface decoration	Controlled color blocks, lettering and selected multi-pass artwork.	Discuss stadium cups and silicone vessels against the actual ink system.	Color separations, screens, registration, adhesion and flex where relevant.	Explore details ↗Enquire about this option →
05LED CustomizationLighting configuration	Lighting plus branding; discuss surface decoration as a separate choice.	LED cups, LED ice buckets and selected bar accessories.	Light modes, activation, power access, cleaning and packaging.	Explore details ↗Enquire about this option →
06Cold Color-Changing InkInteractive inkCURRENT PAGE	A coated region changes color as the wall cools; fixed artwork can gain contrast.	Confirmed cold-response models. Review partial and full variants separately.	Coated zone, room/cold visibility, formula response and UV compatibility.	Explore details ↗Enquire about this option →

LED is a lighting configuration and may be combined with suitable surface decoration. Cold-change and UV combinations also require validation. You can enquire before deciding on every process.

Not sure yet? Ask for selection help →

FROM ARTWORK TO SAMPLE APPROVAL

Designed in layers. Approved in both states.

Discuss this process with your artwork →

Thermochromic ink sample-process concept: Define the coating and fixed artwork — **Define the coating and fixed artwork**
01Coating layout02Room/cold palette

Define the coated area and review room/cold artwork together before any material trial.

AFTER DARK / THE COLD-COLOR EDIT

Six ways to make the night memorable.

Cold-state artwork concepts on six existing vessel models. Original geometry, capacity and reference color-change regions are preserved; print combinations and actual response require model-specific sampling.